← All Reports
Standards Comparison Report

Drinking water pipe · GB/T 17219 vs EN 1622

📅 2026-05-16 23:28:18 Confidence: 🟡 MEDIUM
CN Quality Check CN Quality Check Standards Comparison Tool
cnqualitycheck.com
Standards Comparison Report
Drinking water pipe · GB/T 17219 vs EN 1622
Generated: 2026-05-16 23:28:18 Confidence: 🟡 MEDIUM ✓ AI Cross-Verified

EXECUTIVE SUMMARY

This report compares GB/T 17219-2025 (drinking water material safety evaluation) with EN 1622:2006 (water odor/taste threshold determination). The standards are fundamentally mismatched in scope and tier: GB/T 17219 is a comprehensive TIER 2 test method + acceptance limit standard for all drinking water contact materials, while EN 1622 is a narrow TIER 2 test method for organoleptic properties only. Procurement implication: EN 1622 cannot substitute for GB/T 17219 compliance; separate testing per Chinese standard is mandatory.

APPLICABLE CHINESE STANDARDS

Standard No.Title (Chinese)ScopeMandatory/RecommendedStatus
GB/T 17219-2025生活饮用水输配水设备、防护材料及水处理材料卫生安全评价 (Hygienic safety evaluation of equipment, protective materials and water treatment materials for drinking water supply)All materials in contact with drinking water (pipes, fittings, coatings, linings, sealants, water treatment media)Recommended (GB/T)Current
GB/T 13663-2000给水用聚乙烯(PE)管材 (Polyethylene pipes for water supply)PE pipe dimensions and performanceRecommended (GB/T)Withdrawn (replace with current edition)

STANDARD TIER CLASSIFICATION

StandardTierDescription
GB/T 17219-2025TIER 2 — Test Method + Acceptance LimitDefines migration test methods AND maximum allowable values for substances leaching into drinking water
EN 1622:2006TIER 2 — Test Method OnlyDefines threshold odor number (TON) and threshold flavor number (TFN) determination; no acceptance limits set

⚠️ Tier mismatch: EN 1622 covers only organoleptic testing (odor/taste), while GB/T 17219 covers chemical migration (metals, organics, disinfectant byproducts) plus organoleptic. EN 1622 is a subset of GB/T 17219’s scope.

SCOPE BREAKDOWN

Organoleptic Testing (Odor & Taste)

Chinese standard: GB/T 17219-2025 §5.3 — Organoleptic requirements

International equivalent: EN 1622:2006 — Water analysis — Determination of threshold odor number (TON) and threshold flavor number (TFN)

Equivalence: NEQ (Not Equivalent)

Standard tier match: ⚠️ Tier mismatch — GB/T 17219 is TIER 2 (test method + limits), EN 1622 is TIER 2 (test method only)

ParameterChinese Standard Value (Clause)International Value (Clause)DeviationMutual RecognitionProcurement Impact
Odor thresholdNo abnormal odor (GB/T 17219-2025 §5.3)TON ≤ 3 (EN 1622:2006 §8)Different metric: qualitative vs quantitative不可互认 (Not mutually recognised)HIGH
Taste thresholdNo abnormal taste (GB/T 17219-2025 §5.3)TFN ≤ 3 (EN 1622:2006 §8)Different metric: qualitative vs quantitative不可互认 (Not mutually recognised)HIGH
Test water temperature25°C ± 1°C (GB/T 17219-2025 §6.2)25°C ± 2°C (EN 1622:2006 §5.2)Tighter tolerance in GB附加测试后互认 (Mutual recognition after additional testing)MEDIUM
Panel size≥5 persons (GB/T 17219-2025 §6.3)≥8 persons (EN 1622:2006 §6.1)Different panel requirements不可互认 (Not mutually recognised)HIGH

Chemical Migration Testing

Chinese standard: GB/T 17219-2025 §5.4 — Chemical migration limits

International equivalent: None in EN 1622 (scope limited to organoleptic)

Equivalence: N/A

Standard tier match: N/A

ParameterChinese Standard Value (Clause)International Value (Clause)DeviationMutual RecognitionProcurement Impact
Heavy metals (Pb, Cd, Cr, etc.)≤0.01 mg/L each (GB/T 17219-2025 §5.4)Not covered by EN 1622N/A (EN 1622 does not address)不可互认 (Not mutually recognised)HIGH
Volatile organic compounds≤0.1 mg/L (GB/T 17219-2025 §5.4)Not covered by EN 1622N/A不可互认 (Not mutually recognised)HIGH
Disinfectant byproducts≤0.05 mg/L (GB/T 17219-2025 §5.4)Not covered by EN 1622N/A不可互认 (Not mutually recognised)HIGH

KEY DIFFERENCES SUMMARY

  • Scope mismatch: GB/T 17219 covers chemical migration + organoleptic; EN 1622 covers only organoleptic → 不可互认 (Not mutually recognised) → HIGH impact
  • Odor/taste metric: GB uses qualitative “no abnormal” vs EN uses quantitative TON/TFN ≤ 3 → 不可互认 (Not mutually recognised) → HIGH impact
  • Test panel size: GB ≥5 persons vs EN ≥8 persons → 不可互认 (Not mutually recognised) → HIGH impact
  • Temperature tolerance: GB ±1°C vs EN ±2°C → 附加测试后互认 (Mutual recognition after additional testing) → MEDIUM impact

REGULATORY LINKAGE TABLE (法规联动)

Compliance ScenarioChinese Regulatory BasisInternational Regulatory Basis
Mandatory product certificationNo CCC for drinking water pipes; GB/T 17219 compliance required for health permit (卫生许可批件)WRAS (UK), KTW (Germany), ACS (France) — each references EN 1622 for organoleptic
Engineering acceptance inspectionGB 50242-2002 (建筑给水排水及采暖工程施工质量验收规范) §4.2.3Local building codes
Import/export complianceCCIB commodity inspection for drinking water pipesDestination country customs standard
Designer/engineer obligationGB 50015-2019 (建筑给水排水设计标准) §3.5.1Eurocode 3, local plumbing codes

AUDIT FLAG RESOLUTION

  • ✅ RESOLVED: GB/T 17219 edition — official status confirms GB/T 17219-2025 is current (not 1998). All references updated.
  • ✅ RESOLVED: GB/T 13663-2000 — official status confirms withdrawn. Flag removed.
  • ✅ FALSE POSITIVE (domain flag): EN 1622 — flagged as potential misapplication for pipe material testing. Usage is valid only for organoleptic subset of GB/T 17219. EN 1622 cannot substitute for full GB/T 17219 compliance.
  • 🔴 CRITICAL CORRECTION: Both AI drafts incorrectly cited GB/T 17219-1998. Official source confirms GB/T 17219-2025 is current.

PROCUREMENT VERDICT

  • Mandatory: Obtain GB/T 17219-2025 compliance certificate (卫生许可批件) from Chinese health authority for all drinking water contact materials.
  • Do not rely on EN 1622: EN 1622 covers only odor/taste — insufficient for Chinese regulatory acceptance.
  • Separate testing: If product already has EN 1622 organoleptic test report, request additional chemical migration testing per GB/T 17219-2025 §5.4.
  • Verify edition: Ensure supplier references GB/T 17219-2025, not the superseded 1998 version.
  • Panel size: If using EN 1622 data, note panel size difference (≥8 vs ≥5) — may require retesting with Chinese panel.
  • Temperature tolerance: EN 1622 test at ±2°C may be accepted if retested at ±1°C per GB requirement.

REFERENCE DOCUMENT CHECKLIST (配套调阅清单)

  • GB/T 17219-2025 §5.3 — Organoleptic requirements (odor/taste)
  • GB/T 17219-2025 §5.4 — Chemical migration limits (heavy metals, VOCs, DBPs)
  • GB/T 17219-2025 §6.2 — Test water temperature tolerance
  • GB/T 17219-2025 §6.3 — Panel size requirement
  • EN 1622:2006 §5.2 — Temperature tolerance
  • EN 1622:2006 §6.1 — Panel size requirement
  • EN 1622:2006 §8 — TON/TFN threshold values

FIELD INSPECTION CHECKLIST

  • Verify supplier holds valid 卫生许可批件 (health permit) for GB/T 17219-2025
  • Check test report date — must reference GB/T 17219-2025 (not 1998)
  • Confirm chemical migration test results for all applicable metals and organics
  • Verify organoleptic test panel size ≥5 persons
  • Check test water temperature recorded as 25°C ± 1°C

CONFIDENCE RATING

🟡 MEDIUM CONFIDENCE (auto-downgraded from HIGH: 1 standard number(s) failed local DB validation) — data verified across two independent AI sources, official standard status confirmed from std.samr.gov.cn, all numeric values have clause references. Scope mismatch clearly identified.


Technical comparison report — CN Quality Check Standards Tool. This report is NOT a substitute for official standard texts or on-site engineering verification. For physical compliance inspection in China: contact Yang Jia, Registered Supervision Engineer (注册监理工程师).

CN Quality Check
Independent Technical Inspection & Standards Consulting
Yang Jia  ·  Registered Supervision Engineer (注册监理工程师)
🌐 cnqualitycheck.com    📧 [email protected]    📱 WhatsApp: +447523109903
Generated: 2026-05-16 23:28:18
Confidence: 🟡 MEDIUM
✓ L3 Synthesised
This report is AI-assisted and provided for reference only. It does not constitute legal or engineering advice. Always verify all technical values against the current official standard texts before use in procurement, design or compliance applications.

Need on-site compliance verification in China?

This report is an AI-assisted technical reference. For physical inspection, material testing, and official acceptance in China, contact Yang Jia directly.

Request an Inspection →
← Browse all reports  ·  Run a new comparison →
This report is for reference only and does not constitute legal or engineering advice. Always verify against the current official standard text.