Independent technical inspection & consulting services, led by Yang Jia — a Registered Supervision Engineer (注册监理工程师) with 19 years of MEP and construction experience. We verify quality at the source — so your goods meet spec before they leave China.
All services are delivered under one non-negotiable principle: strict independence. We are engaged by the client, paid by the client, and accountable only to the client. All services are open to both business and individual clients — no minimum order volume required.
We visit your factory or supplier’s site, measure and verify against your technical specifications, and deliver a bilingual evidence report within 24 hours.
Electrical cables, conduit & switchgear · Plumbing pipes, valves & fittings · HVAC equipment & ductwork — covering dimensional checks, material grade, insulation, pressure test witnessing, and export certification labels (CE / UL / AS)
Stone & tile slab sorting · Steel weld & paint film check · Aluminium profile thickness · Lab coordination
Board environmental grade · Edge-banding & hardware · 1:1 pre-assembly trial · Dimension vs. drawing cross-check
Inspect during production or at finished-goods stage — catch defects before they reach the container.
📌 Inspection scope and acceptance criteria are defined by the client. Whether to accept or reject goods is the client’s sole decision.
Request Inspection →We locate and assess qualified suppliers in China. You retain full control of negotiation, pricing, and purchasing. We charge a fixed service fee — nothing more.
Shortlist factories that match your product category, production capacity, and quality level
Convert your English drawings and specifications into a factory-ready Chinese technical brief
On-site review of equipment, QC process, and workforce before you commit to an order
Shipment via our Guangzhou company or direct by the factory — your choice. VAT invoice issued.
📌 Price negotiation and purchasing decisions remain entirely with the client. We do not take trade margins or supplier commissions.
Enquire →Written technical opinions from a credentialled engineer — for dispute resolution, pre-purchase risk assessment, or defect documentation. 🌎 Fully remote — no factory visit required. Submit your documents and receive a signed engineer’s report within the agreed timeframe.
Independent technical opinion on whether goods meet contracted spec — evidence for negotiation, rejection, or legal proceedings
Written assessment of a proposed purchase: supplier risk, specification gaps, and recommended inspection points
On-site survey of delivered or installed materials — document defects with measured evidence during defect liability period
Review supplier’s quality certificates, test reports, and material datasheets against your project requirements
📌 All opinions are the professional view of Yang Jia as an individually licensed engineer, provided via technical consulting engagement.
Discuss Your Case →Select a service to see the exact steps — from first contact to final deliverable.
Client shares purchase order, technical specifications, or drawings. Describe which stage of production or which goods are to be inspected. We confirm the engagement and open an inspection reference.
Agree on the specific checkpoints, applicable standards (GB / ISO / CE / client spec), and pass/fail criteria in writing before any fieldwork begins.
Engineer visits the factory or warehouse. Physical measurements, material and workmanship checks, real-time photo & video documentation against confirmed checkpoints.
Preliminary findings shared with the client during the visit — no surprises at report stage.
Bilingual PDF (EN / 中文) with photographs, measured data, and pass/fail conclusions. Delivered within 24 hours of inspection completion.
If defects are found, we liaise with the supplier on the client’s behalf and re-inspect after corrective action is completed.
Client shares purchase order, technical specifications, and production schedule. We confirm scope, define inspection nodes, and open a project file.
Agree on applicable technical standards and confirm acceptance criteria in writing for each inspection node before any fieldwork begins.
Verify raw materials, components, or semi-finished goods before production begins — reject non-conforming inputs at the earliest possible stage.
On-site checks at critical production milestones. Physical measurements, workmanship assessment, and photo & video documentation in real time.
Finished goods inspection before packing — dimensions, appearance, quantity count, and compliance against purchase order and client specifications.
Witness and document the loading process: verify goods loaded match the approved batch, confirm packing condition, and record container seal number.
Consolidated bilingual report covering all inspection nodes — with photographs, measured data, and pass/fail conclusions for the full production cycle.
If non-conformances are identified at any stage, we coordinate with the supplier and re-inspect after corrective action is completed.
Share product requirements, technical specifications, and target delivery schedule. We confirm scope and open a project file.
Agree on product standards, quality benchmarks, and evaluation criteria before sourcing begins.
We identify qualified manufacturers matching your requirements. Standard materials: minimum 3 candidates. Specialised or custom items: number as agreed with client.
Supplier profiles delivered with capability overview, available certifications, and factory location. Client reviews and selects preferred supplier.
Price negotiation, contract terms, and purchasing are the client’s sole decision. We do not participate in commercial terms or take any trade margin.
Verify raw materials or components before production begins — reject non-conforming inputs before they enter the production process.
On-site checks at critical production milestones. Physical measurements, workmanship assessment, and real-time photo & video documentation.
Finished goods inspection before packing — dimensions, appearance, quantity count, and compliance against purchase order and specifications.
Witness the loading process: verify goods loaded match the approved batch, confirm packing condition, and record container seal number.
Consolidated bilingual report covering all inspection nodes from incoming material through container loading — full audit trail for the entire procurement cycle.
Describe your situation and attach relevant documents — contracts, supplier correspondence, inspection photos, test certificates, or drawings.
We assess feasibility and confirm engagement scope, timeline, and a fixed fee within one business day.
Systematic technical review of all supplied materials against applicable standards, contractual requirements, and industry norms.
On-site visit for defect surveys, condition assessments, or direct evidence collection where physical inspection is necessary to form a complete opinion.
Preliminary findings shared with client to verify factual accuracy. Client may correct factual errors; the professional opinion and conclusions are Yang Jia’s independent judgement and are not subject to client editing.
Signed professional report issued under Yang Jia’s name as a Registered Supervision Engineer. Suitable for dispute negotiation, rejection claims, warranty proceedings, or legal use.
Unlike general QC agents, we interpret technical drawings, understand tolerances, and inspect to your actual specification — not a generic checklist.
Yang Jia personally holds a Registered Supervision Engineer licence (注册监理工程师) — a national professional licence issued by China’s MOHURD. Every inspection is led by this credentialled engineer, not delegated to junior staff.
19 years of on-site project experience across structural works, MEP systems (plumbing & drainage, electrical, fire protection, HVAC, building automation & BMS, elevators, and more), interior fit-out, curtain wall, and specialist kitchen works — builds an exceptionally deep foundation in material and equipment acceptance. We verify the quality of your purchased materials and equipment at source, before they reach the project site, helping you avoid serious quality failures down the line.
Our Guangzhou company issues proper VAT invoices, signs enforceable service contracts, and handles foreign-exchange settlements — protecting your financial records.
Every report includes measured data, calibrated instrument readings, and timestamped photos. Use it to negotiate, reject, or claim warranty in any jurisdiction.
Based in Guangzhou — we reach Foshan, Dongguan, Zhongshan, Shenzhen, and all major Pearl River Delta manufacturing hubs. Most inspections can be scheduled within one business day of booking.
Every engagement starts with a written fee confirmation — no hidden costs, no surprise invoices, no commission from suppliers. Prices shown are starting rates; exact fee confirmed before any work begins.
One-day factory or warehouse visit. Scope and acceptance criteria confirmed in writing before engagement. Bilingual report within 24 h.
Incoming material → in-process → pre-shipment → container loading supervision. Full bilingual audit trail for the entire procurement cycle.
Supplier identification, on-site capability audit, and technical spec translation. Fixed service fee — no trade margin taken.
Written technical opinion for dispute resolution, risk assessment, or defect documentation. Fully remote — no site visit required.
📌 All fees are confirmed in writing before engagement begins. There are no hourly charges and no add-ons. Re-inspection, if required after corrective action, is quoted separately.
Registered Supervision Engineer · Chief Resident Engineer
With over 19 years of hands-on experience in MEP engineering and construction quality management across large-scale commercial and residential projects in the Greater Bay Area, Yang Jia brings a depth of technical knowledge that general inspection agencies simply cannot match.
As a former Chief Resident Engineer (总监理工程师), Yang has led multi-disciplinary supervision teams on projects exceeding 100,000 m² — giving him a systemic understanding of where quality failures originate and how to prevent them at the source.
Services are provided through Guangzhou 19 Information Technology Co., Ltd. (广州壹拾玖信息科技有限公司) in the capacity of technical consulting and independent inspection — not as a licensed 监理单位 under Chinese domestic construction law. Yang Jia's Registered Supervision Engineer licence is a personal professional credential and the basis of his technical expertise.
Yang Jia holds national-level professional licences issued by the Chinese government — providing the legal foundation and technical authority for every engagement.
China's national professional licence for construction supervision, issued by MOHURD. Requires passing the national unified examination (jointly administered by MOHURD and the Ministry of Human Resources and Social Security) followed by formal registration. Registered specialties: Building Construction Engineering · Electrical Engineering. Licence is publicly verifiable on the official MOHURD registry by searching the holder's name.
✓ Verify Official Record →Professional engineering title in Construction Engineering, recognised nationally. Awarded through evaluation of technical competency and work performance. Verifiable via the Hunan Provincial Human Resources and Social Security online platform.
✓ Verify Official Record →Inspection updates, factory case studies, and technical insights — direct from the ground in China.
A licensed engineer's caliper never lies. Here's why profile wall thickness is one of the most overlooked—and most consequential—measurements in any door and window procurement.
Read more →
A bridge. 13 lives. ¥48.86 million in losses. The official investigation found the cause wasn't a design flaw — it was substandard bolts and inspections that existed only on paper.
Read more →Tell us what you need. We’ll confirm feasibility, timeline, and a fixed fee within one business day.
